CURV3D: Update 4
In the last update I went through how I sleeved everything, how to paint aluminium and how the front/backplate and fan-grill was installed. I was able to finish this build,…
CURV3D: Update 3
So I am back from Dreamhack and now I can start update you on what I have done with CURV3D, in the last update I finished the backplate as well…
Cold Winter: Part 3
In part 2 of this buildlog I showed what version 2 of Cold Winter was about. However, I was never really satisfied with that build and I also wanted to…
Cold Winter: Part 2
In part 1 I showed you how I build this case from scratch and everything I did for the first version of Cold Winter, in this one though, part 2, …
Cold Winter: Part 1
Cold Winter was my second project, which went through three different versions, all with different hardware and cooling. In part 1 of this buildlog I will go through how I…
The Red One: Part 3
In part 2 I showed off the acrylic parts I added to finish up the outside of the case, now I will go through how I was sleeving the power-supply…
The Red One: Part 2
In Part 1 of this build I showed off how I started building The Red One. In this part 2 I will show how I finished the case with acrylic…
The Red One: Part 1
I started this site some years ago to show off my builds. This is something I still do under the Projects part of the site, but some of you may…
CURV3D: Update 2
In the first update I went through the beginning of this project back in 2011, how I upgraded the cooling with two 120mm slim fans in the bottom of the…